30 Series Network Video Recorder User Guide
System Alarm Out - A triggered alarm can be used to toggle the NVR's alarm out, e.g., to
sound an alarm siren.
Figure 6-28 System Alarm Out
Send to HVMV–An event message will display on your HVMV software. (An event should
be first setup in HVMV and select Sound the event as action.)
5. Click
and the following window is displayed:
Figure 6-29 Event Schedule
6. Click and drag the mouse to activate or de-activate alarm triggers throughout a specific
timeline.
7. Click Finish to end the configuration.
8. Repeat the process above to create more alarms according to the needs in your
surveillance deployment.
Removing an Event
1. Click
in and the remove button will turn yellow
2. Mouse over to the event you want to remove, and its entry will display the Remove
message.
3. Click the Remove message.
Setting-Event-Email
This page provides an interface where you can configure the connection to a Mail server. via
the Mail server, the system can deliver Emails containing system alarm messages to multiple
46
.