Toshiba e-STUDIO2008A Service Manual page 457

6.13.4 Punch hole position adjustment
This adjustment is performed in the Adjustment Mode (FS-05-4825) of the equipment.
Adjustment scale
Adjustable range
Adjustment direction
© 2015 TOSHIBA TEC CORPORATION All rights reserved
0.2mm
-4.0 mm to 1.0 mm
Increasing the value The distance between the punch hole and the
trailing edge of the paper becomes shorter.
Decreasing the value The distance between the punch hole and the
trailing edge of the paper becomes longer.
6 - 73
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
SETTING / ADJUSTMENT
6