Toshiba e-STUDIO2008A Service Manual page 898

Multifunctional digital systems

Hide thumbs Also See for e-STUDIO2008A:

Table of Contents

Precautions and procedures when replacing the HDD/SSD

Replacing ADI-HDD with SSD is not possible.

Replacing ADI-HDD with SATA-HDD is not possible. When replacing ADI-HDD, replace it with

another ADI-HDD.

When the HDD/SSD is replaced, it is necessary to back up the data in the HDD/SSD before

replacing and to recover them after replacing.

To maintain the security, ask users to perform the backup/restore for users' data/information

in the HDD/SSD. The service technician can perform them only when users permit it.

Some data in the HDD/SSD cannot be backed up and can be kept only on the paper.

Do not replace the HDD/SSD and the SRAM together.

When the HDD/SSD is replaced, do not perform SRAM data formatting (Clear SRAM) before

the normal start-up.

When the HDD/SSD is replaced, do not restore the back-up file before the normal start-up.

A procedure for replacing the HDD/SSD is shown below.

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A

REPLACEMENT OF PC BOARDS/HDD

[A] Back up data in HDD/SSD

[B] Print out "FUNCTION LIST FOR MAINTENANCE"

[C] Print out "FUNCTION" list

[D] Erase HDD/SSD

[E] Replace/Format HDD/SSD

[F] Reset user's setting item and restore data/information

[G] Reset "FUNCTION LIST FOR MAINTENANCE"

[H] Reset "FUNCTION" list

[I] Adjust image quality

Setting completed

Show Quick Links

Table of Contents