Toshiba e-STUDIO2008A Service Manual page 258

4.11 Paper Exit and Reverse Sections
4.11.1 Reverse unit <35ppm/45ppm/50ppm>
(1) Remove the right rear cover.
 P. 4-4 "4.1.10 Right rear cover"
(2) Remove the connecting port cover.
 P. 4-3 "4.1.7 Connecting port cover"
(3) Remove 2 screws.
(4) Disconnect 1 connector [1] and remove 2
screws.
(5) Remove 1 screw.
Notes:
The screw on the front side is a shoulder
screw. When installing, exercise care not to
confuse it with other kinds of screws.
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
© 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 138
Fig. 4-369
Fig. 4-370
Fig. 4-371