[2C6B] Terminal mail address error
Classification
E-mail related error
Check item
Setting
[2C6C] Destination mail address error (No RFC error)
Classification
E-mail related error
Check item
Setting
[2C70] SMTP client OFF
Classification
E-mail related error
Check item
Setting
[2C71] SMTP authentication ERROR
Classification
E-mail related error
Check item
Setting
[2C72] POP Before SMTP ERROR
Classification
E-mail related error
Check item
Setting
[2C80] E-mail transmission failure when processing E-mail job received
Classification
E-mail related error
Check item
Setting
© 2015 TOSHIBA TEC CORPORATION All rights reserved
•
Check the SMTP Authentication method.
•
Check if there is an illegal character in the Terminal mail
address.
•
Set the correct SMTP Authentication method or delete the
illegal character and reset the appropriate Terminal mail
address, then perform the job again.
•
Check if there is an illegal character in the Destination mail
address.
•
Delete the illegal character and reset the appropriate
Destination mail address, then perform the job again.
•
Set the SMTP valid and perform the job again.
•
Check that SMTP authentication method, login name and
password are correct, then perform authentication again.
•
Check that both the POP Before SMTP setting and POP3
setting are correct, then perform authentication again.
•
Reset the "Received InternetFax Forward".
8 - 263
Error item
Measures
Error item
Measures
Error item
Measures
Error item
Measures
Error item
Measures
Error item
Measures
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
ERROR CODE AND TROUBLESHOOTING
8