Toshiba e-STUDIO2008A Service Manual page 377

[ 4 ] Relation between pixel count and toner consumption
The user's printing out the image with large coverage or high density may cause the large value of pixel
count. And the setting that toner consumption becomes high in the original mode or density setting may
cause it as well.
In this case, the replacement cycle of toner cartridge is faster than the standard number of output
pages. Therefore, this trend needs to be grasped for the service.
The relation between pixel count and number of output pages per cartridge is as follows:
X
X/2
X/10
6% 12%
Fig.5-42 Pixel count and number of output pages per cartridge
[ 5 ] Pixel counter confirmation
• Display on LCD screen
Whether or not to display the pixel counter on the LCD screen is selected (0: Displayed, 1: Not
displayed) in the setting mode (08-6504), and whether or not to display it at the service technician
reference or toner cartridge reference is selected (0: Service technician reference, 1: Toner cartridge
reference) in the FS-08-6504.
The following screen is displayed when the buttons, [COUNTER] and [PIXEL COUNTER] are
pressed in this order after "Displayed" is selected with the code above and the power is, as usual,
turned ON. (The displayed buttons are depending on the FS-08-6505.)
© 2015 TOSHIBA TEC CORPORATION All rights reserved
Standard number of output pages
Pixel count (%)
5 - 59
60%
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
SELF-DIAGNOSTIC MODE
5