Toshiba e-STUDIO2008A Service Manual page 291

(19) Open the dual scan document feeder.
Remove 2 screws.
(20) Remove the dual scan document feeder by
sliding it toward the rear side.
4.13.2 MR-3031 (Reversing Automatic Document Feeder)
(1) Press the [Power] button on the control panel
to shut it down.
(2) Turn the main power switch of the equipment
off.
(3) Disconnect the power cable.
(4) Take off the connector cover.
© 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-462
Fig. 4-463
Fig. 4-464
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
4 - 171
m
DISASSEMBLY AND REPLACEMENT
4