MJ-1101/1107
Check item
Entrance sensor
Transport sensor
Parts to be replaced
Entrance sensor
Transport sensor
Finisher controller PC board
MJ-1106/1108
Check item
Finisher
Entrance sensor (S1)
Transport sensor (S2)
Finisher control PC board
(FIN)
Parts to be replaced
Entrance sensor (S1)
Transport sensor (S2)
Finisher control PC board
(FIN)
[EA23] Paper transport stop jam (transport sensor)
[EA24] Paper transport stop jam (between entrance & transport sensor)
[EA25] Paper transport stop jam (after paper stack exit)
[EA26] Paper transport stop jam (stop command request)
[EA27] Paper transport stop jam (paper not inserted)
[EA28] Paper transport stop jam (paper holder plate operation delay)
[EA29] Paper transport stop jam (stack transport delay)
Classification
Paper jam in finisher section
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
ERROR CODE AND TROUBLESHOOTING
Measures
•
Sensor check(S1)
•
Connector check (CN7, CN22)
•
Harness check
•
Sensor check(S2)
•
Connector check (CN7, CN22)
•
Harness check
Remark
Measures
Check if there is any paper in the finisher or on the transport path of
the equipment and remove it if there is.
•
Sensor check
•
Connector check
•
Harness check
•
Sensor check
•
Connector check
•
Harness check
•
Board check
•
Connector check (CN6, CN26)
•
Harness check
Remark
Error content
Paper transport stop jam
8 - 120
© 2015 TOSHIBA TEC CORPORATION All rights reserved