Toshiba e-STUDIO2008A Service Manual page 823

[4F10] System abnormality
Classification
TopAccess related error
Check item
Setting
© 2015 TOSHIBA TEC CORPORATION All rights reserved
Printing was not performed success fully due to other
abnormalities.
1. Perform the job in error again. If the error still occurs, turn
the power OFF and then back ON, and perform the job
again.
2. Collect the debug log with USB media.
 P. 8-3 "8.1.2 Collection of debug logs with a USB
device"
3. Initialize HDD.
Refer to step 3 and later in [E]Replace / Format HDDin
 P. 9-14 "9.2.3 Precautions and procedures when
replacing the HDD/SSD".
8 - 285
Error item
Measures
e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
ERROR CODE AND TROUBLESHOOTING
8