Configuring Panel I/O And Groups - Honeywell MPA1 User Manual

52 |
MPA1 User Guide
4.

Configuring Panel I/O and Groups

To view a configuration of a group of outputs, click Group and select the group number
from the drop-down list. The group configuration screen appears. Note that you can only
view the group configuration from this screen.
The edit the Group configuration, go to Panel Configuration > Outputs > Groups.
Configuring Inputs
The Inputs tab enables you to:
•
•
•
•
1.
•
•
www.honeywell.com/security
Click Save.
Figure 2-28 Door Output Group
Enter a name for the input.
Configure input modes, including the state.
Configure shunt and Debounce settings.
Configure input schedules.
Navigate to the Input tab:
Click Panel Configuration > Inputs, or
Click Panels in the Dashboard.