Honeywell MPA1 User Manual page 53

56 |
MPA1 User Guide
4.
Configuring Output Groups
The Output Groups tab allows you to configure the following:
•
•
In the Output Groups tab, you can configure the following for one or more groups:
•
•
•
•
1.
www.honeywell.com/security
Setting Description
Energized Specifies the period during which the output relay is
automatically energized. Select a schedule (that you created in
Entering a Panel Name on page
Disable Interlocks Specifies the period during which the interlocks that control
the output will be disabled. Select a schedule (that you created
in Entering a Panel Name on page
Click Save.
Note You must select at least one output before you can create a group.
A group of horns to sound for a set time during a set period
Energize or de-energize a group of doors during a set period
Pulse time
Disable/Enable Latch
Energized (schedule selection)
Disable Interlock (schedule selection)
Navigate to the Output Groups tab: Click Panel Configuration > Outputs > Groups.
28) from the drop-down list.
28) from the drop-down list.