Monitoring Inputs - Honeywell MPA1 User Manual

Monitoring Inputs

The panel supports door, panel, and auxiliary inputs. The door inputs provide egress,
status, and tamper monitoring. The auxiliary inputs support any monitoring devices
connected.
The Input Status screen enables you to:
•
•
•
Navigating to the Auxiliary Connections-Inputs tab:
Click
Inputs.
Figure 3-2 Device Management Window
View the current status of each input (Normal, Alarm, Cut, Short, Shunt).
Shunt or unshunt any input. Shunt an input to ignore a change of
can allow a door to be held open without falsely signaling an alarm. The default state
of an input point is "unshunted."
Restore the input to its schedule. A schedule is a specified time period during which
the input will be shunted and the alarm deactivated (see
page 28).
to open the menu, then click Device Management > Auxiliary Connections >
Figure 3-3 Device Management Window - Auxiliary Connections - Inputs
state.
Entering a Panel Name on
Document 800-26311_ A - February 2020
| 81
This way you