Replace A Secondary Panel (Web Mode); Overview; Secondary Panel Replacement And Synchronization; Hard Default A Primary In An Existing Loop (Web Mode) - Honeywell MPA1 User Manual

96 |
MPA1 User Guide

Replace a Secondary Panel (Web Mode)

Overview

Details the steps to replace a MPA1 "Secondary" panel in an existing loop of Ethernet
Virtual Loop (EVL) in Web Mode.

Secondary Panel Replacement and Synchronization

Step # 1. Un-register the original Secondary panel in the Primary panel. Navigate to:
Step # 2. Install the replacement Secondary panel in the loop.
Step # 3. Navigate to the "Advanced" Tab of the primary panel:
IMPORTANT: In order to proceed to Step #4 please wait for the Secondary panel to be
Step # 4. Program and add the new Secondary panels doors into the "Spaces".
Step # 5. Program the custom settings for Readers, Input Points and Output Points.
Step # 6. Perform a "System Wide Backup" when programming is complete.

Hard Default a Primary in an Existing Loop (Web Mode)

Overview
Details the synchronization process of a MPA1 "Primary | Secondary" panel after hard
defaulting an existing "Primary" Panel in Ethernet Virtual Loop (EVL) in Web Mode.

Primary | Secondary Panel Synchronization (Hard Default)

IMPORTANT: Ensure a "System Wide Backup" is performed prior to Hard Default of the
Primary Panel.
Step # 1. Perform a hard default and log into the Web Interface.
Step # 2. Navigate to the "Advanced" Tab of the primary panel:
www.honeywell.com/security
• EVL Tab: Menu > Panel Configuration > Advanced > EVL Discovery.
• EVL Installations: Requires Manual Registration of the Secondary Panels.
• Navigate to the EVL Discovery and "Register" the Secondary Panels.
synchronized. Refer to the "System Detail Chart"
• EVL Installations: Requires Manual Registration of the Secondary Panels.
• Navigate to the EVL Discovery and "Register" the Secondary Panels.