Honeywell MPA1 User Manual page 24

26 |
MPA1 User Guide
3.
Table 2-3 Web Host Communication Mode Settings
Host Setting
Mode
Time Sync
4.
Configuring for MAXPRO Cloud
1.
2.
www.honeywell.com/security
Figure 2-7 Selecting WEB on the Host/Loop Communications Tab
Configure the host settings.
Click Save.
Navigate to Host/Loop Communications:
• Dashboard > Panels > Host/Loop Communications, or
• Menu > Panel Configuration > Host/Loop Communications.
Click to select MAXPRO Cloud.
Description
EVL - If Primary provides access to Ethernet Virtual Loop.
Synchronizes the primary's time with the secondary
panels.
Enabled – Time-synchronizes the loop by automatically
broadcasting the primary's time to secondary panels.
Select from 60-32767 minutes.