Field
Energized
De-energized
Pulse
Restore to Time Zone
Monitoring Output Group
Configuring Output Groups
Before you can monitor output groups, they must first be configured. See
Panel I/O and Groups on page
Navigating to the Auxiliary Connections-Output Groups tab:
Click
Output Groups.
Figure 3-4
Device Management Window - Auxiliary Connections - Outputs
Note
The Output Status screen dynamically refreshes when the output status
changes.
Table 3-2
Output Management Settings
Description
Click to energize an output for an indefinite period of time.
Click to de-energize an output for an indefinite period of time
Click to pulse an output for the configured period of time.
Click to reset the output to follow its configured time zone.
to open the menu, then click Device Management > Auxiliary Connections >
52), and select Group when configuring the output.
Document 800-26311_ A - February 2020
| 83
Configuring