Honeywell MPA1 User Manual page 56

Note
The user should never add in more than one format using the same total
number of bits. If you need more information, please contact Technical
Support.
1. Click the Add icon
and to move the format(s) into the Selected Formats list.
Note If you select no formats, the reader will use all available formats (up to 128
per pane) as described for the Available Formats setting in
select a subset of formats for a given reader, the reader will interpret only
those formats and ignore formats that are not selected, as described for the
Selected Formats setting in
2. Click Save.
If you want to create a new card format, click Circled Add icon
Format data layout screen.
:
MPA1
(+)
of each desired card format under the Available Formats list,
Table 2-7.
Table 2-7
to display an empty Card
Document 800-26311_ A - April 2020
| 59
If you