2.
Firmware Upgrades
Panel Requirements
MPA1 panels must first be upgraded to latest firmware. See the release notes for more
information.
Overview
The following procedures provide step-by-step instructions for upgrading the MPA1
controller.
Upgrading the firmware can involve the following actions:
IMPORTANT: Recommend to back up the database before and after the firmware
upgrade.
Figure 4-2
Settings Panel
Click Reset.
Click OK to reboot the panel.
Note
The secondary (downstream) EVL panels should be upgraded first, and then
the primary (MASTER).
• Backing up the database from each panel
Document 800-26311_ A - February 2020
| 101