GE DMS Go Operator's Manual page 51

2.3.1d Setting the Date and Time (CONFIG-DATE TIME)
In the MAIN menu, scroll to the CONFIG submenu using the joystick (
1.
2. Use the joystick (
3. To change the selected date and time, use the joystick to scroll to the date or time. Then move the joystick up or down (
correct date and time. press F2 (CONFIRM) to confirm the new date or time, or press F1 (EXIT) to close the window without changing
the date or time.
4. After making your choice, use the joystick (
date and time shown on the display screen and in the reports are now set to the choice last selected.
DMS Go Operator's Manual
Your Complete Source for
Testing Equipment. Since 1969!
) to select the DATE TIME function and shift the joystick left or right (
) to move to another function, or press HOME to return to the Main Menu. The
www.BergEng.com
Berg Engineering & Sales Company, Inc.
). Several functions are displayed on the screen.
) to open the Date/Time window.
Chapter 2. Instrument Setup
) to enter the
29
1-847-577-3980
Info@BergEng.com