Setting The Freeze (Measure - Freeze) - GE DMS Go Operator's Manual

Chapter 4. Measuring and Recording Data
4.2.3

Setting the Freeze (MEASURE - FREEZE)

Freezing the A-scan display allows the user to more closely
program the F4 key (see page 49) to FREEZE the display. Then, whenever a display is active, pressing that end of the Function Toggle
freezes the display. The active display will remain as it appeared when the toggle was pressed and the display will remain frozen until it is
pressed again. While the display is frozen, the displayed readings are based on the frozen echoes.
In the MEASURE submenu, activate the FREEZE option using the joystick (
1.
2. Move the joystick up or down (
appears below the function key assignments on the screen. Move the joystick up or down (
3. After making your choice, move the joystick up or down (
the Main Menu.
94
Your Complete Source for
Testing Equipment. Since 1969!
evaluate the measurement and/or adjust the A-scan range and gates. You can
). to turn the freeze On. The screen freezes with the current measurement, and a freeze symbol
) to navigate away from this function, or press HOME to return to
www.BergEng.com
Berg Engineering & Sales Company, Inc.
).
). to turn the freeze Off.
DMS Go Operator's Manual
1-847-577-3980
Info@BergEng.com