Chapter 1. General Information
1.6.3 Connecting the USB Port
The connector closest to the hinge of the top compartment cover (see Figure 5 on page 14) is a Mini USB port. If you use a standard USB
cable to connect the DMS Go to a PC (no special drivers are required), the installed SD card will be added to the list of active drives on the
PC. You can then perform all normal drive activities, such as copying and deleting files, on the DMS Go SD card.
Important:
While the DMS Go is connected to a PC via the USB port, the instrument will not accept any user input from the keypad.
Normal operation resumes as soon as the USB cable is disconnected.
16
Your Complete Source for
Testing Equipment. Since 1969!
www.BergEng.com
Berg Engineering & Sales Company, Inc.
DMS Go Operator's Manual
1-847-577-3980
Info@BergEng.com