Adding A Comment To A Stored Value - GE DMS Go Operator's Manual

6.4

Adding a Comment to a Stored Value

Users can add comments to individual values from the prepared File Comment list.
1. In the Measure mode, with a data file active and the desired data point (which must already contain a thickness measurement) selected,
center-press and briefly hold the joystick.The function key window will now change, so that F4 is NOTE.
2. Press F4 (NOTE) The File Comment List window opens on the display screen.
3. Move the joystick up or down (
When you have completed adding the comment, press F1 (EXIT) to confirm the entry.
The DMS Go will return to Measure mode, and the letter associated with the comment will appear in the "Comments" column next to the
value column.
DMS Go Operator's Manual
Your Complete Source for
Testing Equipment. Since 1969!
) to choose the file comment. Press F2 (TAG) to enter the character. Then, move the joystick .
www.BergEng.com
Berg Engineering & Sales Company, Inc.
Chapter 6. Working with Recorded Data
1-847-577-3980
Info@BergEng.com
121