Using The Calibration Reminder Alarm (Probe & Cal - Cal Reminder) - GE DMS Go Operator's Manual

Chapter 2. Instrument Setup
2.6 Using the Calibration Reminder Alarm (PROBE & CAL - CAL REMINDER)
The DMS Go incorporates a timed alarm feature that causes an icon to appear on user-defined input intervals. To use this alarm:
In the MAIN menu, scroll to the PROBE & CAL submenu using the joystick (
1.
2. Use the joystick (
the mode, or the parameter that will trigger the reminder (TIME IN MINUTES, NUMBER OF READINGS, POWER ON, and OFF) and then
the value the reminder alarm will trigger. Setting this value automatically resets the alarm to trigger on the specified intervals. This
function also allows the alarm to be disabled (OFF).
3. Press the function toggle or move the joystick (
Press F2 (CONFIRM) to acknowledge the triggered alarm and reset it to resume normal operation or F 4 (EXIT) to close the window
4.
without changing the alarm setting.
Note: The selection of the VELOCITY function also resets the alarm.
70
Your Complete Source for
Testing Equipment. Since 1969!
) to select the function titled CAL REMINDER. The CALIBRATION REMINDER CONFIG window opens. Input
) to change the alarm interval.
www.BergEng.com
Berg Engineering & Sales Company, Inc.
).
DMS Go Operator's Manual
1-847-577-3980
Info@BergEng.com