Using The Sd Slot, Usb Connector & I/O Connector - GE DMS Go Operator's Manual

Chapter 1. General Information
1.6 Using the SD Slot, USB Connector & I/O Connector
The DMS Go uses a standard 2 to 8 GB SD memory card for storing data set files and reports and for loading an instrument software upgrade
(see "Multi-Key Functions" on page 10). The SD card slot is located in a compartment on the top of the instrument, along with a USB
connector and an I/O connector (see Figure 5 below).
14
Your Complete Source for
Testing Equipment. Since 1969!
USB Connector
I/O Connector
Hinged Cover
Figure 5: Top View of DMS Go Case
www.BergEng.com
Berg Engineering & Sales Company, Inc.
SD Card Slot
DMS Go Operator's Manual
1-847-577-3980
Info@BergEng.com