Using Existing Data Recorder Files (Dr - Properties) - GE DMS Go Operator's Manual

Chapter 6. Working with Recorded Data
6.3

Using Existing Data Recorder Files (DR - PROPERTIES)

Note: Before you can use this function, you must create and/or select a file in the Explorer option.
The Properties option allows you to enter (and, in some parameters, edit) data in a given file.
In the DR submenu, use the joystick (
1.
of the DR file is displayed at the top of the grid, and the display appears similar to Figure 29 below. The parameters listed will vary with
the type of file created.
110
Your Complete Source for
Testing Equipment. Since 1969!
) to select and enter the PROPERTIES function. When the DR file is displayed, the name
Figure 29: The Properties Option
www.BergEng.com
Berg Engineering & Sales Company, Inc.
DMS Go Operator's Manual
1-847-577-3980
Info@BergEng.com