Adjusting The Display; Setting The Display Range (Measure - Display Range) - GE DMS Go Operator's Manual

Chapter 4. Measuring and Recording Data
4.2

Adjusting the Display

To configure the DMS Go display, follow the instructions in this section.
4.2.1

Setting the Display Range (MEASURE - DISPLAY RANGE)

Display Range starts after Display Delay elapses. It represents the visible part of the sound track in inches or millimeters, and should contain
all echoes of interest, or a subsection for more detailed views. . If the instrument's range needs to be modified, complete the steps on the
next page.
Note: Display Range is present when a probe is selected. It represents the standard thickness range for the selected probe, and can be
modified if needed.
90
Your Complete Source for
Testing Equipment. Since 1969!
www.BergEng.com
Berg Engineering & Sales Company, Inc.
DMS Go Operator's Manual
1-847-577-3980
Info@BergEng.com