Setting The Display Delay (Measure-Display Delay) - GE DMS Go Operator's Manual

4.2.2 Setting the Display Delay (MEASURE-DISPLAY DELAY)

Display delay represents the transit time between the initial zero (T0) of the transmit pulse to the left hand edge of the A-scan area. A
display delay value of zero always makes the transmit pulse visible at the left hand edge of the A-scan area. This parameter is used with the
display range to align the A-scan echoes on the display. To set the display delay:
In the MAIN menu, scroll to the MEASURE submenu using the joystick (
1.
2. Use the joystick (
3. Press the Function 3 or 4 keys to change the display delay in increments of 2.5
in increments of 0.001
s
4. After completing your selection, move the joystick up or down (
return to the Main Menu.
DMS Go Operator's Manual
Your Complete Source for
Testing Equipment. Since 1969!
) to select the function titled DISPLAY DELAY.
. As you change the value, you should see the displayed echoes shift to the left or the right.
Berg Engineering & Sales Company, Inc.
).
or move the joystick (
s
) to navigate away from this function, or press HOME to
www.BergEng.com
Chapter 4. Measuring and Recording Data
) to change the display delay
1-847-577-3980
Info@BergEng.com
93