Powering The Instrument On And Off; Using The Keypad - GE DMS Go Operator's Manual

Chapter 1. General Information
1.1 Supplying Power to the Instrument (cont.)
When the AC adapter is connected to the instrument, the icon in the upper right corner of the display indicates the percentage of full-charge
of the battery pack. When removing the battery pack to install a charged spare, the instrument will automatically turn OFF if the AC adapter
is not connected to the instrument. However, if the adapter is connected, the instrument will remain ON while you change battery packs.

1.2 Powering the Instrument ON and OFF

To power the DMS Go ON or OFF, simply press the power button,
button press is recognized, you will hear the click of an internal relay. Then, after about 4 seconds, the display controller will be fully loaded
and the display will become visible.

1.3 Using the Keypad

The DMS Go is designed to provide the user quick access to all of the instrument's functions. Its easy-to-use menu system allows any
function to be accessed with a minimum of effort.
See Figure 2 on page 5 for the locations of the front-panel components described in this chapter.
4
Your Complete Source for
Testing Equipment. Since 1969!
, on the side of the case (see Figure 1 on page 2). As soon as the
www.BergEng.com
Berg Engineering & Sales Company, Inc.
DMS Go Operator's Manual
1-847-577-3980
Info@BergEng.com