Displaying Measured Results (Measure- Results) - GE DMS Go Operator's Manual

Chapter 4. Measuring and Recording Data
4.3

Displaying Measured Results (MEASURE- RESULTS)

The instrument is capable of displaying up to six measured readings at one time. The displayed readings are selected using the RESULTS
submenu. The parameters available for display, which depend on the instrument configuration and the evaluation mode, include the
following:
•
LOC - The location of the reading (for example, A1 or B2)
•
GAIN - The gain value automatically set up by the DMS Go
•
M GAIN - The maximum gain value, entered by the user in the Measure menu.
•
TEMP - The current temperature of the material, entered by the user in the Probe & Cal menu.
•
THK - The thickness of the material measured by the DMS Go (not compensated by temperature)
•
T-THK - Temperature Compensated Thickness, or the thickness of the material as measured by the DMS Go, compensated by the
temperature
•
P-DLY - The probe delay, or the time between when the DMS Go generates a pulse and the time it leaves the probe and enters the
material (or its travel time through the probe, typically measured in microseconds)
•
C-THK - Coating thickness when in TopCOAT mode.
•
OFF
100
Your Complete Source for
Testing Equipment. Since 1969!
www.BergEng.com
Berg Engineering & Sales Company, Inc.
DMS Go Operator's Manual
1-847-577-3980
Info@BergEng.com