Keypad Components - GE DMS Go Operator's Manual

1.3.2 Keypad Components

The DMS Go keypad includes the following items (see Figure 2 on page 5):
•
Center-press joystick (
may either be "pressed" or "pressed and held."
•
Function 1, 2 toggle (
other end is the "Function 2" button. Either end of the toggle can either be "pressed" or "pressed and held." Pressing the Function 1
button by itself causes the DMS Go to return Home to the Main Menu.
•
Function 3, 4 toggle (
other end is the "Function 4" button. Either end of the toggle can either be "pressed" or "pressed and held."
In specific menus, the function keys can offer specific uses (for instance, scrolling through preassigned steps). The upper left section of the
display screen shows the current function key assignments for the current menu or option.
DMS Go Operator's Manual
Your Complete Source for
Testing Equipment. Since 1969!
): The joystick may be moved either "left or right" or "up or down." In addition, the center of the joystick
): The two ends of the upper toggle act as separate buttons. One end is the "Function 1" button, while the
): The two ends of the lower toggle act as separate buttons. One end is the "Function 3" button, while the
www.BergEng.com
Berg Engineering & Sales Company, Inc.
Chapter 1. General Information
7
1-847-577-3980
Info@BergEng.com