Language, Units Of Measurement, Date, And Time - GE DMS Go Operator's Manual

2.3.1 Language, Units of Measurement, Date, and Time

Use the procedures in this section to adjust the units of measurement, the date, the time, and the language that appears on the display screen,
as well as the operator level and the password. These parameters are in the CONFIG submenu, highlighted in Figure 8 below.
DMS Go Operator's Manual
Your Complete Source for
Testing Equipment. Since 1969!
Figure 8: The CONFIG Submenu
www.BergEng.com
Berg Engineering & Sales Company, Inc.
Chapter 2. Instrument Setup
25
1-847-577-3980
Info@BergEng.com