Chapter 6. Working With Recorded Data; Selecting A Data File (Dr - Explorer) - GE DMS Go Operator's Manual

Chapter 6. Working with Recorded Data

The DMS Go combines a thickness gauge with sophisticated data recording capabilities. It permits an operator to save and organize all
thickness measurement data (along with comments, A-scan graphics, B-scan cross-sectional profiles, Micro-Grids, and other information)
into data files for editing, evaluation and export to PCs via the SD card or the USB port.
6.1

Selecting a Data File (DR - EXPLORER)

1. Use the joystick (
If you have created files, the display appears similar to Figure 28 on the next page.
DMS Go Operator's Manual
Your Complete Source for
Testing Equipment. Since 1969!
) to select the function titled EXPLORER in the DR menu. Move the joystick right (
www.BergEng.com
Berg Engineering & Sales Company, Inc.
Chapter 6. Working with Recorded Data
) to open the function.
1-847-577-3980
Info@BergEng.com
107