Making And Recording Measurements - GE DMS Go Operator's Manual

Chapter 3. Creating Data Recorder Files
3.5

Making and Recording Measurements

Once you have opened the data file and configured the DMS Go, you are ready to take and record measurements.
1. Apply couplant to the material being tested, and then carefully (but firmly) place the probe's contact surface onto the couplant-covered
surface. Use the least amount of couplant necessary to obtain quick, stable thickness readings.
2. When you have obtained a reading, press F2 (SEND) to send the reading to the data location.
3. Repeat steps 1 and 2 as often as necessary to take all the readings necessary.
82
Your Complete Source for
Testing Equipment. Since 1969!
www.BergEng.com
Berg Engineering & Sales Company, Inc.
DMS Go Operator's Manual
1-847-577-3980
Info@BergEng.com