Setting Up A Dual Element Transducer (Measure - Dual Multi) - GE DMS Go Operator's Manual

4.1.1

Setting up a Dual Element Transducer (MEASURE - DUAL MULTI)

Note: This function does not appear if a single-element probe is connected.
The Dual Multi mode is available when a dual-element type transducer is connected to the DMS Go. It starts ultrasonic detection from the
zero crossing before a peak echo detected in gate-A and ends with the zero crossing before a peak echo in gate-B. The DMS Go calculates
and displays a thickness result value from the acquired data. This mode, sometimes called "Thru-Coating," is always used with a
dual-element probe to test thickness through painted or coated materials. From the base material, the probe measures between two backwall
echoes. If you have attached a dual element transducer to the DMS Go, you should set this option to ON.
In the MAIN menu, scroll to the MEASURE submenu using the joystick (
1.
2. Use the joystick (
3. To change the Dual Multi mode, move the joystick (
4. After completing your selection, move the joystick up or down (
return to the Main Menu.
DMS Go Operator's Manual
Your Complete Source for
Testing Equipment. Since 1969!
) to select the DUAL MULTI function.
www.BergEng.com
Berg Engineering & Sales Company, Inc.
).
) to ON or OFF.
) to navigate away from this function, or press HOME to
Chapter 4. Measuring and Recording Data
1-847-577-3980
Info@BergEng.com
89