Setting Security Functions - GE DMS Go Operator's Manual

Chapter 2. Instrument Setup

2.3.3 Setting Security Functions

Follow the procedures in this section to adjust the display appearance. (The adjustments require access to the CONFIG submenu.)
2.3.3a Permitting a User to Access Specified Functions (CONFIG - LOCKOUT)
A supervisor might need other users to have access only to particular DMS Go functions. The DMS Go has two user levels: Expert and
Inspector. The Expert can access all functions, while the Inspector can use only those functions that have not been locked out in the
LOCKOUT menu. Set up the PASSWORD function (page 50) before selecting functions for inspectors.
In the MAIN menu, scroll to the CONFIG submenu using the joystick (
1.
2. Use the joystick (
shown in Figure 16 below) opens.
46
Your Complete Source for
Testing Equipment. Since 1969!
) to select LOCKOUT, and then to enter the function. The function menu (a duplicate of the Main Menu, as
Figure 16: Lockout Option Window
www.BergEng.com
Berg Engineering & Sales Company, Inc.
).
DMS Go Operator's Manual
1-847-577-3980
Info@BergEng.com