Changing The Display Mode; Naming The Analyzer Location; Adjusting Display Contrast Settings - GE Sievers 900 Series Operation And Maintenance Manual

• Consumables Settings — Prints usage and expected life information about
consumables.

Changing the Display Mode

By default, the Analyzer displays the last TOC value in the largest size font on the main screen. If
your application prioritizes IC or TC, you can change the display appropriately as follows:
1. Select the Maintenance tab.
2. Press the Advanced button.
3. Press the Advanced Setup button.
4. Press the Display Mode button.
5. Depending on which value you want displayed in the large font, select TOC, IC, or TC.

Naming the Analyzer Location

You can assign a name to the Analyzer that displays on printed and exported data. This feature is
particularly useful if you have multiple Analyzers at your facility and want to easily distinguish data
collected from each instrument. To assign a name, follow these steps:
1. Select the Maintenance tab.
2. Press the Advanced button.
3. Press the Advanced Setup button.
4. Press the Location button.
5. Use the keypad to specify a name for the Analyzer and press Enter.

Adjusting Display Contrast Settings

The Analyzer's color LCD can be adjusted for proper viewing in your environment as follows:
1. Select the Maintenance tab.
2. Press the Advanced button.
3. Press the Advanced Setup button.
GE Analytical Instruments ©2009 116 of 236 DLM 90488-01 Rev. A