Setpoint Profiler
5.4 How to set up a profiler
Up to 4 profilers can be programmed, depending on the options on your instrument. There are two menus
for programming a profiler: PROGRAM PROFILERS in the Program menu, and SETPOINT PROFILES in
the Online menu. Both must be accessed to program a profiler. Both menus are described in this section.
Program Profilers menu (in Program mode)
This menu lets you define various parameters for controlling the profiler's execution. To access the
Program Profilers menu:
1.
Press the Menu button until a main menu is displayed.
2.
Select Set Mode and change the mode to Program.
3.
Select Program Profilers.
4.
Select a profiler (#1 through #4) to program. Only profilers that are not actively running are selectable.
Table 5-3 briefly describes the prompts for all profilers. For detailed descriptions, refer to Sections 5.2 and
5.3. See Table 4-2 for additional prompts.
200
VPR & VRX – User Manual
12/00