Figure 6-4 Vertical Trend At 2X Zoom - Honeywell VPR100 User Manual

Online Operations Using Primary Displays
Prompt
TIMEBASE Lets you change the timebase of the trend. Choices are:
NORMAL – use the trend's normal timebase.
ALTERN (Alternate) – use the trend's alternate timebase.
Move the cursor box to the desired timebase and press Enter. The trend will be redisplayed
in the new timebase. An arrow points to the current timebase. Timebases are specified in the
program mode. Available for live trends only.
If a storage trend 's CHANGE WITH KEY is set to YES, then changing the timebase will also
change the storage rate of the storage trend. That is, if the live Trend1 is displayed in
NORMAL timebase, then the storage Trend1 will be stored at the LOW rate. If the live
Trend1 is displayed in the ALTERN timebase, then the storage Trend1 will be stored at the
HIGH rate. Trend2 behaves the same way.
NEW FILE Select to see the Replay From Disk menu, from which you may select another stored file for
replay. Available for replay trends only.
TEMP7
1500.0
12:15
11:45
11:15
A ALARM 1 HIGH
224
Table 6-2 Point/Detail Menu Prompts (continued)
1941.5

Figure 6-4 Vertical Trend at 2X Zoom

VPR & VRX – User Manual
Definition
DEGF
2500.0
Z o o m c u r s o r
A m o u n t o f
2X
m a g n i f i c a t i o n
12/00