Alarm Notification; Viewing Video From The Time Of An Alarm; Event Processing; Figure 6-2 The Alarm Bell Icon In View Software - Honeywell Rapid Eye Operator's Manual

Alarms from Events

Alarm Notification

Viewing Video from the Time of an Alarm

Event Processing

The alarm is dealt
with by an operator
using View.
78
When an alarm reaches a View operator's PC, the alarm bell icon in View appears to vibrate
(see 6-2) and the PC produces a beeping sound.
Figure
Figure 6-2 The Alarm Bell Icon in View Software
The alarm icon vibrates
when an alarm reaches
a View operator's PC.
Click the alarm bell icon (shown in
not acknowledged; only the ringing stops. Ringing will resume if a session is reopened.
A View operator has the option of customizing if and how video from the time and site of the
alarm is received. Video can be seen:
• Immediately. Live video from the site where the alarm was sent is seen full-screen
(see
Live Alarmed Session
as needed.
• On request (see
Alarm Session
managed, with video retrieved as it is needed.
Figure 6-3 Once Set to Alarm an Event Can Trigger an Alarm
6-2) to stop the ringing of an alarm. Alarms are
Figure
on page 84). Alarms are then acknowledged and re-armed
on page 85). Video from multiple alarms can be
An event is
detected
Multi database
A Multi SA sets
which events
trigger alarms.
A record of the
alarm is stored in
the Multi-Media
database.