Set Mode - Honeywell VPR100 User Manual

4.5 Set Mode

Select this item to change the operating mode of the instrument to Online, Program or Maintenance. The
top of the display will show which mode you have changed to.
Program mode
Program mode is an off-line mode for programming (configuring) the instrument. In this mode, all outputs
are frozen.
Online mode
Online Mode enables full use of the instrument with its inputs, outputs and internal programming. In this
mode, it is fully interactive with all externally connected elements.
Maintenance mode
Maintenance Mode is an off-line mode for maintaining proper and complete functioning of the instrument.
Functions include calibration, off-line diagnostic testing, and various setups for operation. In Maintenance
Mode, all outputs are frozen.
ATTENTION
Note: Changing to ONLINE mode by pressing any of the Display buttons can cause incorrect values to be
displayed. The values will correct themselves in a few seconds. To avoid this potential annoyance, change to
online mode through SET MODE instead of through the Display buttons.
12/00
Programming Function Blocks and Features
VPR & VRX – User Manual 81