Table of Contents
Advertisement
Programming Function Blocks and Features
Prompt
SET UP SCHEDULE
START HOUR
START MINUTE
START MONTH
START DAY
START YEAR
INTERVAL DAYS
INTERVAL HOURS
INTERVAL MINS
SELECT FILENAME
FILE
PROD
UNIT
CONFIG KILN
CALIB
FURNCE DEMIN
BATCH
LINE
ZONE
ATTENTION
A maximum of 12 data points per second can be stored in Trends 1, 2, 3, and Unit Data combined.
176
Table 4-73 Unit Data Prompts (continued)
Range/Selections
CYCLE
DRYER
RECORD TANK
LOOP
REACTR
VESSEL
WCHEM
PRESS
CONTRL
FERMTR LEHR
STRLZR
OVEN
VPR & VRX – User Manual
Definition
If no external enable is specified, select a starting date
and time and an interval for periodic storage. Set Interval
Days to 31 if you want the timed schedule to repeat on
the same day each month.
This timer schedule will run in any Data Storage mode. In
CONTINUOUS mode, it will start as scheduled and collect
samples until stopped by manual command (the ENABLE
STORAGE in the Online Data Storage menu).
In BATCH mode, the timer schedule will be started and
stopped by an Online menu selection (BATCH STATE) by
the operator, or by an optional discrete input designated
as the BATCH CONTROL.
Select a file name to identify the type of Unit data to be
stored.
12/00
Advertisement
Table of Contents
