Honeywell VPR100 User Manual page 178

Programming Function Blocks and Features
Table 4-63 Assign Displays To Keys Prompts (continued)
Prompt
DISPLAY 1 FORMAT
DISPLAY 2
.
.
.
DISPLAY 10
NUMBER
ROTATION RATE
162
Range/Selections
VPR & VRX – User Manual
Definition
Select one of the following display formats (Figure 4-19 and
Figure 4-20). The corresponding format will be shown when
the Display keys are pressed.
NONE
V_TREND (Vertical Trend)
VTRNDDIG (Vertical Trend Digital)
VTRNDBAR (Vertical Trend w/ 4 Bars) (VRX 150)
H_TREND (Horizontal Trend)
HTRNDDIG (Horizontal Trend Digital)
HTRNDBAR (Horizontal Trend Bar)
V_3_BAR (3 point Vertical Bar Graph) (VPR 100/VRX 100)
V_4_BAR (4 point Vertical Bar Graph) (VRX 150)
V_6_BAR (6 Point Vertical Bar Graph)
V_8_BAR (8 point Vertical Bar Graph) (VRX 150)
V_12_BAR (12 point Vertical Bar Graph) (VRX 150)
H_4_BAR (4 point Horizontal Bar Graph) (VRX 150)
H_6_BAR (6 point Horizontal Bar Graph) (VRX 150)
PANEL_4 (4 point Panel Display) (VRX 150)
PANEL (Panel Display) (VPR 100/VRX 100)
UNIT DATA (Unit Data Display)
PANMETER (Panel Meter)
ALARMSUM (Alarm Summary)
STORAGE (Storage Status)
TOTALIZR (Totalizer)
LOOP_BAR (Loop with Bar Graph)
LOOP_2BS (Loop 2 Bar Summary)
LOOP_3BS (Loop 3 Bar Summary)
LOOP_4BS (Loop 4 Bar Summary)
SPP_2BS (Setpoint Profiles 2 Bar Summary)
SPP_3BS (Setpoint Profiles 3 Bar Summary)
SPP_4BS (Setpoint Profiles 4 Bar Summary) (VRX 150)
SP_TREND (Setpoint Profile Trend)
PRO_SUM (Process Summary) (VRX 150)
ANALOGS (Analog Summary) (VRX 150)
DISCRETE (Discrete Summary) (VRX 150)
Appears if a trend, bar graph, loop, or setpoint profile trend
format is selected. Select which data group to be displayed.
Example: if the format is LOOP_BAR, enter 2 to display Loop
2 data. Example: if the format is V_TREND, enter 1 to
display Trend 1 data.
Appears if panel, trend, or bargraph display format is
selected. Select number of seconds each point will be shown
on the panel display or at the top of the trend or bargraph
displays: 1, 2, 3, 4, 5, 10, 15, 20, 30, 40, 50, 60
12/00