Alarm Notification; Viewing Video From The Time Of An Alarm; Event Processing; Figure 6-2 The Alarm Bell Icon In View Software - Honeywell Rapid Eye Operator's Manual

Alarms from Events

Alarm Notification

Viewing Video from the Time of an Alarm

Event Processing

The alarm is dealt
with by an operator
using View.
78
When an alarm reaches a View operator's PC, the alarm bell icon in View appears to vibrate
(see Figure 6-2) and the PC produces a beeping sound.
Figure 6-2 The Alarm Bell Icon in View Software
The alarm icon vibrates
when an alarm reaches
a View operator's PC.
Click the alarm bell icon (shown in
not acknowledged; only the ringing stops. Ringing will resume if a session is reopened.
A View operator has the option of customizing if and how video from the time and site of the
alarm is received. Video can be seen:
• Immediately. Live video from the site where the alarm was sent is seen full-screen
(see Live Alarmed Session
as needed.
• On request (see Alarm Session
managed, with video retrieved as it is needed.
Figure 6-3 Once Set to Alarm an Event Can Trigger an Alarm
Figure 6-2) to stop the ringing of an alarm. Alarms are
on page 84). Alarms are then acknowledged and re-armed
on page 86). Video from multiple alarms can be
An event is
detected
READY
ALARM
HDD
TM
Multi database
A Multi SA sets
which events
trigger alarms.
A record of the alarm
is stored in the Multi
database.