Cisco ONS 15454 Manual page 79

Turning Up a Node
Step 8
In the Alien Wavelength pane, complete the following:
• From the Alien Wavelength drop-down list, choose the required wavelength. Select Trunk 100G or 200G
• From the FEC drop-down list, choose the required FEC type.
Step 9 In the Alien wavelength pane, click Finish.
Step 10 Return to your originating procedure (NTP).
NTP-G355 Provisioning OTDR
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Procedure
Step 1 Complete the
Step 2 Complete the
Step 3 Complete the
Step 4
Complete the
Stop. You have completed this procedure.
DLP-G793 Configuring Common OTDR Parameters for OTDR Scan
Purpose
Tools/Equipment
for 100GS-CK-LC and 200G-CK-LC cards.
DLP-G793 Configuring Common OTDR Parameters for OTDR Scan, on page
DLP-G782 Configuring OTDR Port Values , on page
DLP-G783 Provisioning OTDR Scan Recurrence, on page
DLP-G784 Configuring Threshold Values for OTDR Scan , on page
NTP-G355 Provisioning OTDR
This procedure describes how to provision OTDR for
the TNCS-O and TNCS-2O cards.
TNCS-O or TNCS-2O cards
• DLP-G46 Log into CTC
As Needed
Onsite/Remote
None
81.
84.
(Cisco ONS 15454 M6, NCS 2015, ) This task lets
you configure common OTDR parameters for OTDR
scan on TNCS-O and TNCS-2O cards.
TNCS-O or TNCS-2O card
Turning Up a Node
79.
85.
79