Cisco ONS 15454 Manual page 64

NTP-G212 Manually Provisioning a GNE/ENE to Manage an ENE using SNMPv3
Required/As Needed
Onsite/Remote
Security Level
Procedure
Step 1 In node view, click the Provisioning > SNMP > SNMP V3 tabs.
Step 2
Complete the following tasks as required:
•
•
•
•
•
Stop. You have completed this procedure.
NTP-G212 Manually Provisioning a GNE/ENE to Manage an ENE
using SNMPv3
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Turning Up a Node
64
DLP-G496 Creating an SNMPv3 User, on page 68
DLP-G498 Create Group Access , on page 69
DLP-G497 Create MIB Views , on page 69
DLP-G501 Creating Notification Filters, on page 72
DLP-G499 Configure SNMPv3 Trap Destination , on page
destination, use the IP address of the NMS, and the port number on which the NMS is listening for traps.
Required if you want to implement SNMPv3 on your
network.
Onsite or remote
Provisioning or higher
70. When you configure an SNMPv3 trap
This procedure describes how to manually configure
a GNE/ENE to allow the NMS to manage an ENE
using SNMPv3.
None
• DLP-G46 Log into CTC
• NTP-G22 Verifying Common Card Installation
Required if you want to implement SNMPv3 on your
network.
Onsite or remote
Provisioning or higher
Turning Up a Node