Cisco ONS 15454 Manual page 72

DLP-G501 Creating Notification Filters
Required/As Needed
Onsite/Remote
Security Level
Procedure
Step 1 In node view, click the Provisioning > SNMP > SNMPv3 > Trap Destination tabs.
Step 2 In the Trap Destinations area, select the trap you want to delete.
Step 3 Click Delete. A confirmation dialog box appears.
Step 4 Click Yes.
Step 5 Return to your originating procedure (NTP).
DLP-G501 Creating Notification Filters
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Procedure
Step 1
In node view, click the Provisioning > SNMP > SNMP V3 > Notification Filters tabs.
Step 2 Click Create.
Step 3
In the Create Notify dialog box, enter the following information:
• Filter Profile Name—Specify a name for the filter.
• Subtree OID—The MIB subtree which, when combined with the mask, defines the family of subtrees.
• Bit Mask—A family of view subtrees. Each bit in the bit mask corresponds to a sub-identifier of the
• View Type—Select the view type. Options are Include and Exclude. Type defines whether the family
Step 4
Click OK to save the information.
Turning Up a Node
72
subtree OID.
of subtrees that are defined by the subtree OID and the bit mask combination are included or excluded
from the notification filter.
As needed
Onsite
Provisioning or higher
This procedure creates SNMPv3 notification filters.
None
DLP-G46 Log into CTC
As needed
Onsite
Provisioning or higher
Turning Up a Node