Cisco ONS 15454 Manual page 69

Turning Up a Node
Step 4
Click OK to create an SNMP user.
Step 5 Return to your originating procedure.
DLP-G497 Create MIB Views
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Procedure
Step 1 In node view, click the Provisioning > SNMP > SNMP V3 > MIB views tabs.
Step 2 Click Create.
Step 3
In the Create Views dialog box, enter the following information:
• Name—Name of the view.
• Subtree OID—The MIB subtree which, when combined with the mask, defines the family of subtrees.
• Bit Mask—A family of view subtrees. Each bit in the bit mask corresponds to a sub-identifier of the
• Type—Select the view type. Options are Included and Excluded.
Step 4 Click OK to save the information.
Step 5
Return to your originating procedure.
DLP-G498 Create Group Access
Purpose
• Password—Enter a password if you select a protocol other than None.
subtree OID.
Type defines whether the family of subtrees that are defined by the subtree OID and the bit mask
combination are included or excluded from the notification filter.
DLP-G497 Create MIB Views
This procedure creates an SNMPv3 MIB view.
None
• DLP-G46 Log into CTC
As needed
Onsite
Provisioning or higher
This procedure creates a user group and configures
the access parameters for the users in the group.
Turning Up a Node
69