Add Call Park On A Key Expansion Module Line Key; Configure The Lcd Brightness For A Key Expansion Module - Cisco 8800 Series Administration Manual

Cisco IP Phone Administration
• fnc= prk means function=call park
• sub= 999999 is the phone to which the call parks. Replace 999999 with a numbers.
• nme= XXXX is the name displayed on the phone for the call park line key. Replace XXXX with a name.
Step 5 Click Submit All Changes.

Add Call Park on a Key Expansion Module Line Key

You can add call park to a Key Expansion Module line key to enable the user to temporarily store calls to the
same phone to which the Key Expansion Module is connected or to store calls to a different phone. The user
can also unpark the call from the line key.
Before you begin
Access the phone administration web page. See
Procedure
Step 1
Select Voice > Att Console.
Step 2 Select a Key Expansion Module line key on which to enable the call park.
Step 3
Enter a string in this format:
For a private line, enter
For a shared line, enter
where:
• fnc= prk means function=call park
• sub= 999999 is the phone to which the call parks. Replace 999999 with a numbers.
• nme= XXXX is the name displayed on the phone for the call park line key. Replace XXXX with a name.
Step 4
Click Submit All Changes.

Configure the LCD Brightness for a Key Expansion Module

You can configure the brightness of the LCD display on the key expansion module from the Attendant Console.
Before you begin
Access the phone administration web page. See
Access the Phone Web Page, on page
fnc=park;sub=$USER@$PROXY;nme=CallPark-Slot1
fnc=prk;sub=$USER@$PROXY;nme=Call-Park1;orbit=<DN of primary line>
Access the Phone Web Page, on page
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
Add Call Park on a Key Expansion Module Line Key
88.
.
88.
.
201