Cisco 8800 Series Administration Manual page 189

Cisco IP Phone Administration
Macro Name
SA through SD
MA
MAU
MAC
PN
PSN
SN
CCERT
IP
EXTIP
SWVER
HWVER
PRVST
Macro Expansion
Replaced by special purpose parameters GPP_SA through GPP_SD. These parameters
hold keys or passwords used in provisioning.
$SA through $SD are recognized as arguments to the optional resync URL
Note
qualifier, --key.
MAC address using lowercase hex digits (000e08aabbcc).
MAC address using uppercase hex digits (000E08AABBCC).
MAC address using lowercase hex digits with a colon to separate hex digit pairs
(00:0e:08:aa:bb:cc).
Product Name; for example, IP Phone 8861.
Product Series Number; for example, 8861.
Serial Number string; for example, 88012BA01234.
SSL Client Certificate status, installed or not installed.
IP address of the phone within its local subnet; for example, 192.168.1.100.
External IP of the phone, as seen on the internet; for example, 66.43.16.52.
Software version string; for example, 2.0.6(b). Use the software version string to
compare against the current phone's firmware load, with one of the following methods:
• With quotes, "$SWVER"–Variable acts as a string in firmware load name
comparisons. For
"$SWVER" eq "sip8845_65.1-0129-18-0356dev.loads"
phone model number and load number are part of the comparison.
• Without quotes, $SWVER–Variable is parsed to determine a build number, plus
major, minor, and micro revision numbers. For example, when the
sip88xx.11-1-1MSR-1dev.loads
firmware names are parsed, the result ignores the model number and load number.
The result for both firmware names yields a major revision=
micro revision= , and build number=
1MSR
Hardware version string; for example, 1.88.1.
Provisioning State (a numeric string):
• -1 = explicit resync request
• 0 = power-up resync
• 1 = periodic resync
• 2 = resync failed, retry attempted
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
and
sip8845_65.11-1-1MSR-1dev.loads
, minor revision=
1
.
1
Macro Variables
, the
,
1
173