Cisco Ip Phone Installation; Verify The Network Setup - Cisco 8800 Series Administration Manual

Cisco IP Phone Installation

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Verify the Network Setup

For the phone to operate successfully as an endpoint in your network, your network must meet specific
requirements.
Procedure
Step 1
Configure a VoIP Network to meet the following requirements:
• VoIP is configured on your routers and gateways.
Step 2
Set up the network to support one of the following:
• DHCP support
Verify the Network Setup, on page 37
Install the Cisco IP Phone, on page 38
Configure the Network from the Phone, on page 40
Set Up Wireless LAN from the Phone, on page 46
Turn the Wi-Fi On or Off from the Phone Web Page, on page 48
Set Up a Wi-Fi Profile from the Phone Web Page and the XML Provisioning Server, on page 48
Verify Phone Startup, on page 50
Video Transmit Resolution Setup, on page 50
Configure the Voice Codecs, on page 51
Configure the Video Codec, on page 52
Set the Optional Network Servers, on page 52
VLAN Settings, on page 53
SIP and NAT Configuration, on page 61
Dial Plan, on page 71
Regional Parameters and Supplementary Services, on page 79
Cisco IP Phone 8800 Series Documentation, on page 84
C H A P T E R
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
4
37