Provisioning - Cisco 8800 Series Administration Manual

Provisioning

Parameter
EXT RTP Port Min
NAT Keep Alive Intvl
Redirect Keep Alive
Provisioning
Configuration Profile
Parameter
Provision Enable
Resync On Reset
Resync Random Delay
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
282
Cisco IP Phone Troubleshooting
Description
External port mapping number of the RTP Port
Minimum number. If this value is not zero, the RTP
port number in all outgoing SIP messages is
substituted for the corresponding port value in the
external RTP port range.
Default: 0
Interval between NAT-mapping keep alive messages.
Default: 15
If enabled, the IP phone redirects the keepalive
message when SIP_301_MOVED_PERMANENTLY
is received as the registration response.
Description
Allows or denies resync actions.
Default: 160,159,66,150
The device performs a resync operation after power-up
and after each upgrade attempt when set to Yes.
Default: Yes
A random delay following the boot-up sequence
before performing the reset, specified in seconds. In
a pool of IP Telephony devices that are scheduled to
simultaneously power up, this introduces a spread in
the times at which each unit sends a resync request to
the provisioning server. This feature can be useful in
a large residential deployment, in the case of a
regional power failure.
The value for this field must be an integer ranging
between 0 and 65535.
The default value is 2.